The canister filter is an external filtering device and takes up significantly more space, outside the tank. The first difference you will notice between the hang on back filter and the canister filter is the size. If you are unsure or have any other questions about saltwater tanks, take a quick look here! Canister Filter vs HOB Filter Most saltwater tanks need biological filtration by the environment itself – your filter will provide simple mechanical filtration and take care of the waste removal. What will be different from the freshwater tank is the media type used for filtration. ![]() However, in larger saltwater tanks they will be used secondarily, as support. Given their usual size and the fact that they take up next to no space in the tank, these filters are ideal for small aquariums (5-10 gallon). Lets take a look what makes hang on back filters a good choice and where you might use them. FAQsĬhoosing a filter is a complex process and even though it may sound like the HOB filter is the right one, there may be other better options. Whilst the sponge is out you should replace the filter media. You should take out the sponge, get rid of anything stuck to it and also rinse it in a bucket of tank water. To do this unplug it, disassemble it and thoroughly clean all the pipes, tubes or chutes. The filter should be cleaned as your aquarium starts to get dirty. In terms of cleaning, these filters don’t need much. Priming the filter involves manually filling the filter with water, however some filters have a self-priming system too. If there is no cut out, you can decide where the filter will go. There is usually a cut on your tank lid to indicate where to place the filter. Some filters have individual baskets which indicate where each type of media should go. They are relatively cheap, easy to clean and don’t need changing often. The most common filtering material found is a simple sponge. This is usually what you will see advertised first on all HOB filters along with the recommended volume. ![]() It’s usually stated as the volume of water filtrated in an hour. ![]() The filter’s output capability is also important. In other words, a filter with the output of 30 gallons per hour will be ideal for a 9-10-gallon tank. Normally, flow requirements depend on what type of fish (or other animals) you are keeping.Ī good filter should be able to go through all the water in your tank about three or four times in an hour. They will usually have an adjustable slider either on the inflow tube or somewhere else on the case. These filters allow you to take control of the water flow. There are a number of things you need to consider to help you choose the right hang on back filter for your tank setup.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |